Quadcopter with 370mm ABS frame

 17,000.00

10 in stock

Category:

Description

 X220S FPV Racer RC Drone Omnibus F4 5.8G 72CH 30A Dshot600 2206 2300KV 800TVL CCD ARF

Danuc Quadcopter Combo Pack Is Here!! It consists Of Quad Frame, Bldc Motors, Escs And Propellers. Quad Copter 370mm Diameter Frame Is A Dji Type Sturdy Yet Light Weight Frame Which Is Capable Of Surviving Repeated Crashes. Each 2300 Kv Bldc Motor With Its 5  Inch Pusher And Puller Propeller Matched Pair Is Capable Of Providing Maximum Thrust Of 400 Gm Per Motor. This Quad Rotor  Weighs Around 1.1 Kg.Seamok high quality Brushless Esc Included ,provides  30 amp Load Current For Motor Drive. This Esc Is Factory Programmed And Ready To Use.

Warning: Flying Quad Copter Platforms Requires Considerable Amount Of Practice And Skill. If Not Handled Correctly, It Can Cause Severe Injury. Please Read The Flight Controller Manual Carefully Before Starting. Please Make Sure That You Remove The Props Before Doing Any Calibration And/Or Configuration Changes.

Kit Content:

1 X ABS Plastic Quad Copter Frame With Integrated Pcb Version

4 X Brushless Dc Out Runner Motor 2300 Kv

4 X Bldc Esc 30 A

2 X 10 X 5.5 Inch Pusher And Puller Propeller Matched Pair

1 X APM  Multi Copter Control Board V 2.8

1 X 2.4ghz 4-Channel Transmitter & Receiver

1x Low Voltage Battery Alarm Indicator

1 X 2200 Mah 3s 11.1v Li Po Battery

1 X Lipo Balance Charger

1 X MPU6050 IMU

Reviews

There are no reviews yet.

Be the first to review “Quadcopter with 370mm ABS frame”

Your email address will not be published. Required fields are marked *