Description
FPV Racer RC Drone
Danuc Quadcopter Combo Pack Is Here!! It consists Of 3D Printed closed Quad Frame, Bldc Motors, Escs And Propellers. Quad Copter 450mm Diameter Frame Is Sturdy Yet Light Weight Frame Which Is Capable Of Surviving Repeated Crashes. Each 2300 Kv Bldc Motor With Its 5 Inch Pusher And Puller Propeller Matched Pair Is Capable Of Providing Maximum Thrust Of 400 Gm Per Motor. This Quad Rotor Weighs Around 1.1 Kg.Seamok high quality Brushless Esc Included ,provides 30 amp Load Current For Motor Drive. This Esc Is Factory Programmed And Ready To Use.
Warning: Flying Quad Copter Platforms Requires Considerable Amount Of Practice And Skill. If Not Handled Correctly, It Can Cause Severe Injury. Please Read The Flight Controller Manual Carefully Before Starting. Please Make Sure That You Remove The Props Before Doing Any Calibration And/Or Configuration Changes.
Kit Content:
1 x ABS Plastic Quad Copter Frame With Integrated Pcb Version
4 x Brushless Dc Out Runner Motor 2300 Kv
4 x Bldc Esc 30 A
2 x 10 X 5.5 Inch Pusher And Puller Propeller Matched Pair
1 x APM Multi Copter Control Board V 2.8
1 x 2.4 Ghz 6-Channel Transmitter & Receiver
1x Low Voltage Battery Alarm Indicator
2 x 2200 Mah 3s 11.1v Li Po Battery
1x Lipo Balance Charger
1 x FPV Camera with 1080 HD resolution.
1 x 5.8Ghz Transmitter and reciever complete set for wireless video reception.
Reviews
There are no reviews yet.